亞克力燈罩吹塑機吸頂燈燈罩生產設備LED燈罩外殼成型機——2019神燈獎申報技術

?

項目名稱：  亞克力燈罩吹塑機吸頂燈燈罩生產設備LED燈罩外殼成型機

Acrylic Lampshade Blow Molding Machine Equipment LED Lampshade Shell Molding Machine

申報單位：  中山市古鎮鐔旺模具加工店

綜合介紹或申報理由：

原理：
板材經烘箱加熱軟化后，人工把片材放置在下模具上面；下模板上升用模具壓圈與開合模具將板材夾緊，充入壓縮氣，吹脹板材至設定高度；上模下行，把已吹脹的板材壓下、使板材向四周方向拉伸，同時上、下模閉合；此時進入成型壓縮氣充脹板材成型到位。經短時冷卻后模具按設定次序回位，人工將成型制品拿出工作位。此次序為一個工作循環。

Principle:            

After the sheet is heated and softened by oven, the sheet is placed on the top of the lower die manually; when the lower template rises, the sheet is clamped by the die ring and the opening and closing die, filled with compressed gas, and blown the sheet to a set height; when the upper die goes down, the blown sheet is pressed down, the sheet is stretched in all directions, and the upper and lower dies are closed; at this time, the forming of the compressed air-filled sheet is in place. After a short time of cooling, the mould is put back in the set order, and the moulded products are manually taken out of the working position. This sequence is a work cycle.

主要技術參數：

如圖
   

技術及工藝創新要點：

用塑料板材制成的各種凸形的熱成形制品，例如各種圓形、方形的吸頂燈具Various convex thermoforming products made of plastic sheets, such as round and square ceiling lamps

申報單位介紹：

中山市古鎮鋅旺模具加工店是塑料吹塑機、亞克力燈罩模具、亞克歷燈罩機械等產品專業生產加工的公司，擁有完整、科學的質量管理體系。中山市古鎮鋅旺模具加工店的誠信、實力和產品質量獲得業界的認可。

Zhongshan Guzhen Zinwang Mold Processing Shop is a professional manufacturer of plastic blow moulding machines, acrylic lampshade moulds, acrylic lampshade machinery and other products. It has a complete and scientific quality management system. The integrity, strength and product quality of Zinwang Mold Processing Shop in Guzhen, Zhongshan City have been recognized by the industry.

產品圖片：